EK9000|Ethernet Bus Coupler
EthernetThe EK9000 Bus Coupler connects Ethernet networks to the EtherCAT Terminals(ELxxxx)as well as the EtherCAT Box modules(EPxxxx)and converts the telegrams from Ethernet to the E-bus signal representation.One station consists of an EK9000 and any number of EtherCAT Terminals.The coupler is connected to Ethernet via RJ45.In EtherCAT,the Ethernet coupler has at its disposal a lower-level,powerful and ultra-fast I/O system with a large selection of terminals.The coupler supports the Modbus TCP protocol and fits seamlessly into Ethernet networks.
|
Technical data
|
EK9000
|
|
Task within EtherCAT system
|
coupling of standard digital and analog EtherCAT Terminals and EtherCAT Box modules to Ethernet networks
|
|
Number of EtherCAT Terminals
|
depending on the process data size
|
|
Type/number of peripheral signals
|
depending on the process data size
|
|
Protocol
|
Modbus TCP, Modbus UDP
|
|
Data transfer rates
|
100 Mbaud
|
|
Configuration
|
not required
|
|
Bus interface
|
2 x RJ45 (switched)
|
|
Power supply
|
24 V DC (-15 %/+20 %)
|
|
Input current
|
typ. 120 mA + (total E-bus current)/4
|
|
Current consumption E-bus
|
up to 2 A
|
|
Power contacts
|
24 V DC max./10 A max.
|
|
Electrical isolation
|
500 V (power contact/supply voltage/Ethernet)
|
|
Dimensions (W x H x D)
|
64 mm x 100 mm x 73 mm
|
|
Operating/storage temperature
|
0…+55 °C/-25…+85 °C
|
|
Relative humidity
|
95 %, no condensation
|
|
Vibration/shock resistance
|
conforms to EN 60068-2-6/EN 60068-2-27
|
|
EMC immunity/emission
|
conforms to EN 61000-6-2/EN 61000-6-4
|
|
Protect. class/installation pos.
|
IP 20/variable
|
|
Approvals
|
CE, UL, Ex
|
